Engineered Construction^®

Scott has been designing and helping contractors build bridges since he graduated with a Masters degree from the University of Colorado in 1984. His passion was ignited after attending a lecture by famed Swiss Bridge Engineer Christian Menn in his junior year at CU. He worked for Figg and Muller Engineers for five years after graduation and was lucky enough to learn from Frenchman Gerard Sauvegeot in Denver and Jean Muller himself for 4 months in Paris.

Scott left Figg and Muller in 1989 to start the firm Finley McNary Engineers with Craig Finley. This firm quickly developed a reputation for complex segmental bridges and construction engineering. Notable projects that Scott was responsible for during this time was the Hanging Lake Viaduct in Colorado, The Baldwin Bridge in Connecticut, C & D Canal Bridge in Delaware, the Sidney Lanier Bridge in Georgia and the Natchez Trace Parkway Bridge in Tennessee.

Finley McNary was acquired by Parsons Transportation Group in 2001. During his two years at PTG, Scott was responsible for the Construction Engineering on the Skyway Bridge and the Benicia Martinez Bridge in California.

Scott left PTG in 2003 and formed McNary Bergeron & Associates with Jim Bergeron and Jeremy Johannesen. Notable projects that McB has done under his leadership include the Colorado River Bridge in Nevada, the Maroon Creek Bridge in Colorado, the SW Line Bridge in Tacoma, Washington and numerous footbridges with Bridges to Prosperity.

Scott has been married to his wife Judy for 29 great years. They have three children, Erin, Jack and Tom, who attend the University of Colorado. He enjoys travel, golf, tennis, skiing, woodworking and fly fishing in his spare time.

Jim founded McNary Bergeron & Associates in 2003 with Scott McNary and Jeremy Johannesen with the objective of serving the complex bridge industry with innovative, cost-effective, and safe solutions for design and construction.

Jim has over 30 years of experience in the design and construction of complex bridges across the country. Jim has worked largely in the capacity of the general contractor’s construction engineer, but has also worked in the capacity of the owner’s representative, the project engineer for the general contractor, expert witness, and the Designer’s representative.

Jim resides in McB’s Connecticut office and is the firms managing partner. Jim specializes in complex bridge erection schemes, custom equipment design, heavy lifts and the design of temporary works.

Jim lives in Old Saybrook, Connecticut with his wife Krista of 27 years, and has four children: Jack, Ryan, Will and Abby.  Jim has coached youth baseball and basketball for years, and enjoys boating, fishing, skiing, carpentry, and woodworking in his free time.

Jeremy’s compulsion to bring order to his world has benefited McB’s clients since the company’s inception. Every project, whether it’s the design of the bridge, the erection system or a one-off lifting beam, is a personal challenge to solve problems and make a difference. McNary Bergeron’s strength is due to our mix of skills which can deliver project-sized solutions and sort out thorny details. Having an equally versatile background, Jeremy is well suited to help our clients tackle their projects.

Mike has been involved in heavy civil bridge projects in a number of capacities. He has detailed post-tensioning systems for segmental box girder bridges and custom high capacity tendons and rock anchors. He has served as on-site project engineer and helped manage multi-million dollar construction contracts. Mike has also produced shop drawings and designed complex equipment and temporary works for large scale bridge projects, including box girder and arch bridges.

Mike’s experience includes structural design of vehicular and pedestrian bridge superstructures and substructures, multi-story commercial buildings, parking garages, municipal/civil structures, and residential buildings. Structural materials and systems used include prestressed concrete, steel girders, reinforced concrete, timber framing, and micropile, helical screw pile, driven steel pile, and concrete caisson foundations.

Thomas has been involved in bridge projects both domestic and international. He has been involved in the design of falsework for the cantilever erection and pier table of a cable-stayed signature bridge. He also worked on the longitudinal PT analysis and geometry of the cantilever erection of a new precast segmental bridge. At his previous job, he was the lead bridge engineer designing suspension pedestrian bridges to be built in Rwanda, Nicaragua, Haiti, Bolivia and Panama. He has also spent time overseeing the construction of some of these pedestrian bridge projects in Rwanda and Nicaragua.

Phil has been with McNary Bergeron since early 2007 and has worked as a consultant in the civil engineering industry since 2000. He has extensive experience with the design and construction of precast and cast-in-place segmental bridges, having worked on over 20 different segmental concrete bridge projects.

Phil specializes in integrating complex 3-D post-tensioning and reinforcing, and in the geometry control of precast and cast-in-place segmental construction. He also has extensive knowledge and experience with temporary works, construction equipment, and erection sequencing.

When he’s not in the office, he enjoys getting up into the Colorado mountains to get his two young daughters hooked on camping, biking and skiing.

Matthew’s experience includes structural design and analysis of span by span and balanced cantilever segmental concrete bridges. He also is experienced in the review of construction equipment and erection procedures.

Previously Matthew designed AASHTO girder bridges as well as shipping wharfs. He has performed wave/structure interaction analysis for pile foundations and floating structures.

Harry brings 5 years of experience in design and construction engineering of complex concrete segmental and steel bridges. His site experience includes troubleshooting, quality control, erection gantry / equipment inspection and submittal management. He has performed structural reviews of launching gantries, erection manual production, kinematic sequencing and constructability review. Harry also has experience in designing temporary concrete foundations, steel lifting frames and temporary structures, demolition analysis, and construction engineering for segmental pre-cast and cast-in-place concrete bridges. Prior to joining McNary Bergeron & Associates he worked for a construction materials consulting firm.

Harry first joined the bridge industry building pedestrian footbridges in Bolivia with Bridges to Prosperity. He continues so support Bridges to Prosperity and Engineers in Action serving as EOR, mentoring student teams, and aiding in construction labor when time allows. Outside of building bridges, Harry enjoys snowboarding and mountain biking.

Danny has been involved in heavy civil bridge construction since beginning his career working for a heavy civil bridge contractor. He has designed crane access trestles, cofferdams, heavy duty shoring, temporary foundations, and various other temporary works for large complex bridges throughout North America, specializing in large steel bridge erection. In addition to bridge construction he has experience with several complex bridge removals including top down removal with heavy equipment on the structure and conventional removal of steel and concrete bridges. Danny enjoys challenges and finding creative solutions to the complicated problems that McNary Bergeron takes on.

Tony began his career in heavy civil construction in 2006 while studying at the University of Central Florida. He has experience in accelerated bridge construction, temporary works design, heavy movable bridge structures, steel and concrete girder erection, foundation installation, and precast and cast in place concrete segmental bridge erection.

Tony has worked to bring BIM (Building Information Modeling) and virtual construction workflows into the heavy civil industry to provide added value to clients throughout the construction lifecycle.

Aric received his Bachelor’s Degree in Civil Engineering from Michigan Technological University. He began his career in 2014 as a roadway/bridge inspector where he worked on multiple bridge projects in Florida and Virginia. Also, prior to joining McB, he spent time working on the contractor side as a project engineer on a pre-cast segmental job in Birmingham, Alabama. Aric has gained experience with the review and implementation of construction engineering for precast segmental bridges and more recently design of precast concrete slabs, rigging diagrams, and erection manuals. When he’s not in the office, he enjoys fishing, disc golf, and looking for new food to try.

JJ began his career working in commercial construction prior to joining the McB Connecticut office in 2017. His experience includes structural design of precast soffit systems, crane trestles, equipment rail systems, lifting frames, rigging, as well as temporary falsework. Recently, he has been involved in the erection analysis and procedures for horizontally curved plate girders, post-tensioned spliced concrete girders, and steel arch bridges.

Born and raised in Italy, Max moved to the US in 2014 to obtain a bachelor’s degree in civil engineering from the University of Colorado Boulder in 2018. He has been a part of McB since 2017, initially working as an intern, followed by full-time employment as an EI upon graduation.

Max has gained experience with construction engineering for precast segmental bridges, including defining segment geometry for precasting, and longitudinal and transversal construction analysis for segment erection and handling. He has also assisted with erection manuals for use in the field that address span-by-span erection on shoring towers, on sliding beams and by overhead gantry, including gantry kinematics.

Max has also worked onsite as a construction engineer for the reconstruction of a precast segmental viaduct in Birmingham, Alabama, assisting with problem solving in daily operations, falsework and erection manual compliance inspections, and related guidance.

Charbel received his Bachelor’s and Master’s Degrees in Civil Engineering from the University of Florida. He began his career in 2015 with PCL Civil Constructors where he worked on multiple bridge projects between Cape Canaveral, FL, Charleston, SC, and Conway, SC gaining construction experience that includes temporary trestle, deep foundations, and concrete and steel girder erection. Charbel joined the Tampa office of McNary Bergeron in 2018 as part of the team working to solve various challenges in the world of heavy civil construction engineering.

Erich has over 9 years of heavy civil construction engineering experience. Prior to joining MCB he spent 7 years on the contractor side, working as an on-site engineer on cast-in-place segmental jobs in Georgia and Vermont, as well as the Hartford Lateral Slide project. His design experience includes heavy duty falsework and temporary works, formwork, erection and crane planning, concrete and steel girder erection plans, demolition plans, geometry control, and temporary retaining walls.

Before joining McB in 2019, Alex has been involved in international civil infrastructure projects. His background includes the design and check of steel truss and prestressed concrete girder bridges. He is also experienced on the design of RC tanks, retaining walls and building structures.

At McB, Alex has been working on the construction analysis for precast segmental bridges, the design of erection falsework, and the design of prestressed concrete girder bridges.

Dan started his construction and engineering career over 13 years ago.  Prior to joining McNary Bergeron in the Colorado office in 2020, he spent his career on the general contractor side in heavy civil and marine bridge construction.  He has served the full spectrum of roles from field engineer to project management on notable projects including the SFOBB SAS and the New NY Bridge (Tappan Zee).

Spending a good part of his career with a 2000-ton Sheerleg crane, Dan is experienced in the development and execution of heavy lifts, including an array of custom lifting devices.  He brings with him the experience in means and methods, erection sequencing, demolition, specialized equipment development, constructability and economic solutions required to execute challenging infrastructure projects.  He looks to continue his passion with McNary Bergeron.

Outside of the office, Dan enjoys spending time with his wife and keeping his two young children active in swimming, gymnastics, climbing, and soccer.

Daniel is a graduate student from the University of Florida, currently working on his master’s degree in Civil Engineering with an emphasis on structures. Before joining McB, Daniel was involved in cutting-edge research focused on integrating computational optimization techniques and scale wind model testing to reduce the cost and environmental impact of civil structures. Daniel‘s passion for bridges stemmed from his involvement with the UF steel bridge team where he won first place nationally during his year as Captain. Daniel continues to be involved with the steel bridge team as an advisor, mentoring future structural engineers. In addition to scholarly affairs, Daniel had interned for the Army Corps of Engineers in Pyeongtaek, Korea, working alongside structural engineers on vertical structures such as hospitals and aircraft hangers.